Soffietti Piani termosaldati con lamelle fisseSoffietti Piani termosaldati con lamelle fisse
Soffietti piani con lamelle fisseSoffietti piani con lamelle fisse

Thermic-welded cover with fixed laminations

Bellows with fixed laminations are used on every type of machine tool: often used in machining centres and metal-cutting machines.
Metal elements, called “laminations”, protect the bellows from shavings and prevent damages.

PEI thermo-welded flat bellows are composed of:

  • Bellows (3): fabrics resistant to water, oil, coolants, dust and shavings.
  • PVC supports (4): give rigidity to the entire bellows and are cut to size according to the profile of the customer’s guides.
  • Connection flanges (1 and 2): for simple attachment to the machine.

Working positions:

– Horizontal
– Vertical
– Frontal

Data

Data

Thermic-welded cover with fixed laminations

Definition of data for the calculation of the closed length of PEI thermic-welded flat bellows

P.A. = Open length

P.C. = Closed length

LC (Stroke) = Open length – Closed length

Ap = Open fold

B = Bellows size

a = Bellows height

x = Fold height

Thermic-welded cover with fixed laminations

Overall dimensions of the fixed blades as a function of the width of the bellow fold

Bellows fold width = x
(mm)
15202530354045
Blade packet thickness = L
(mm)
16212633434856
Size of the blades above the rails =Z
(mm)
455565758595105
Formulae
Thermic-welded cover with fixed laminations

Indicative formula for the calculation of the closed length of thermo-welded flat bellows with fixed blades

* See materials list

Contact our technical office

Thermic-welded cover with fixed laminations

Example of calculation

* We hypothesize that the material of the bellows is the code

“TEMAT151”

** We hypothesize that the thickness of the support is 1 mm

*** We hypothesize that the thickness of the flange is 3 mm

       See materials list

Standard Materials

Standard Materials

The fabrics selected by PEI have excellent mechanical resistance and resist bending and bending that occur during operation in the machine. They have excellent resistance to petroleum products, oils and strong abrasion, small welding splashes or incandescent material.

Main strength characteristics of the bellows materials:

Fabric material codeDescriptionThickness
(mm)
Heat resistancePrimary resistance characteristics
Visible sideFabric insertInternal sideMomentary contact °CContinuous
min. °Cmax. °C
TEMAT 106PtfePolyester0,30+200-30+120
Excellent resistance to oils and chemical products. No adhesive surface. Low friction coefficient. Excellent chemical inertia. Excellent resistance to abrasion and bending strength. Mainly used in grinding machines.
TEMAT 015PolyurethanePolyesterPolyurethane0,25+200-30+ 90
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength.
TEMAT 151PolyurethanePolyesterPolyurethane0,35+200-30+ 90
TEMAT 164PolyurethaneKevlar*Polyurethane0,35+350-30+180
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength. Excellent mechanical strength. Kevlar also has excellent shear strength. Normally used when there is heavy mechanical stress, a large amount of sharp shavings, and at high temperatures.
TEMAT 165PolyurethaneNomex*Polyurethane0,36+300-30+130
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength. Excellent mechanical strength. Good resistance to minor welding splatter or hot material. Widely used in laser cutting machines.
Self-extinguishing.
TEMAT 169PolyurethanePanox*/KevlarPolyurethane0,33+300-30+130
Excellent resistance to petroleum products, oils and heavy abrasion . Excellent bending strength. Excellent mechanical strength. Good resistance to minor welding splatter or hot material. It may be considered as the best fabric on the market for use in laser cutting machines. Self-extinguishing.
TEMAT 017PVCPolyesterPVC0,36+100-30+ 70
Mainly used around heavy ambient dust, minor splatters of coolant and oil. Also suitable for use around acids.
TEMAT 020PVCPolyesterPVC0,25+100-30+ 70

Further materials are available on request: consult our technical department.

Materials for the attachment flanges
Media materialDescriptionThickness (mm) Notes
PVC 05PVC0,50Bellows length (B) up to 300 mm
PVC 10PVC1,00Bellows length (B) from 301 to 700 mm
PVC 15PVC1,50Bellows length (B) from 701 to 1500 mm

The PVC support, shaped to measure with the structure of the customer’s rails and welded to each fold of the bellows, gives the heat-sealed bellows excellent stability.

Flange materialsDescriptionThickness (mm)
ALAluminum2-3-4-5
STAINLESS STEELAISI3041-1,5-2-2,5-3
ACCarbon Steel1-1,5-2-2,5-3-4-5
PVCPVC1-1,5-2-3

The anchoring of the bellows to the machines takes place through the end part of the bellows equipped with rigid flanges in aluminium, stainless steel, carbon steel and PVC.

Flanges

Fixing

Thermic-welded cover with fixed laminations
  1. = Flange

Attachment flange fixing systems

-Type A et Type I

  • Solution with connection flange Type A: Flange covered by the fabric of the bellows (without last support)
  • Solution with Type I attachment flange: Painted flange fixed to the last support of the bellows
  • Solution with attachment flange in steel, aluminium or PVC sheet
  • Shape and drilling according to the customer’s drawing
Thermic-welded cover with fixed laminations

Attachment flange fixing systems

–Type B1 and Type B2

  • Solution with connection flange Type B1: Flange that protrudes entirely from the shape of the bellows
  • Solution with connection flange Type B2: Flange that protrudes externally with respect to the shape of the bellows
  • Solution with attachment flange in steel, aluminium or PVC sheet
  • Shape and drilling according to the customer’s drawing
Thermic-welded cover with fixed laminations

Attachment flange fixing systems

–Type C

  • Solution with Type C attachment flange: Painted flange fixed to the last support of the bellows with threaded holes
  • Solution with steel sheet attachment flange
  • Shape and drilling according to the customer’s design
  • The flange holes are threaded
Thermic-welded cover with fixed laminations
  1. = PVC cover stiffener
  2. = Strip of Velcro applied to the machine
  3. = PVC stiffener
  4. = Flange
  5. = Strip of Velcro applied to the machine

Attachment flange fixing systems

–Type E and H

Solution using VELCRO type quick fixing.

The task of the attachment flange is carried out by a PVC support to which VELCRO is applied. A Velcro strip is applied directly to the machine.

This solution offers the following advantages:

  • Quick application and removal of the bellows
  • Reduced cost

Recommended in dry work environments

Thermic-welded cover with fixed laminations
  1. = PVC stiffener
  2. = Flange
  3. = PVC stiffener
  4. = Flange
  5. = Counterflange

Attachment flange fixing systems

–Type F and G (Entire fold in PVC)

Solution through HIGH TENACITY quick fixing.

The attachment flange is made of sheet steel, aluminium or PVC, with shape and drilling according to the customer’s design.

This solution offers the following advantages

  • Quick application and removal of the bellows
  • Perfect perimeter sealing by applying mousse.

Recommended in a humid working environment

Structures

Structures

Thermic-welded cover with fixed laminations

Standard structures for flat thermic-welded bellows

UL-OS = Folding fabric only
UL-2ST = Thermic-welded bellows with two weld seams and pull-out stop inside the bellows
UL-1S = One-sided bellow with PVC supports
UL-3S = One-sided thermic-welded bellows with three welded edges
DL-DXC = Thermic-welded bellows with two welded edges
TL-SIM = Thermic-welded bellows with three welded edges, symmetrical shape
TL-DXC = Thermic-welded bellows with three welded edges, asymmetrical shape
TL-DXI = Thermic-welded bellows with three welded edges, slanted shape
CL-SIM = Thermic-welded bellows with five welded edges, symmetrical shape
QL-QUAD = Thermic-welded bellow, square shape
QL-CAP = Thermic-welded bellow, roof shape
QL-RETT = Thermic-welded bellow, rectangular shape
QL-ASI = Thermic-welded bellows with four welded edge, asymmetrical shape
CL-ASI = Thermic-welded bellows with five welded edge, asymmetrical shape

Documentation