Forme-1Forme-2Forme-3Forme-4Forme-5Forme-6Forme-7Forme-8Forme-9Forme-10Forme-11Forme-12Forme-13Forme-14

The above are only the standard shapes. Other shapes available upon request.

Materials

Thermic-Welded Cover materials

Fabric material codeDescriptionThickness
(mm)
Heat resistancePrimary resistance characteristics
Visible sideFabric insertInternal sideMomentary contact °CContinuous
min. °Cmax. °C
TEMAT 106PtfePolyester0,30+200-30+120
Excellent resistance to oils and chemical products. No adhesive surface. Low friction coefficient. Excellent chemical inertia. Excellent resistance to abrasion and bending strength. Mainly used in grinding machines.
TEMAT 015PolyurethanePolyesterPolyurethane0,25+200-30+ 90
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength.
TEMAT 151PolyurethanePolyesterPolyurethane0,35+200-30+ 90
TEMAT 164PolyurethaneKevlar*Polyurethane0,35+350-30+180
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength. Excellent mechanical strength. Kevlar also has excellent shear strength. Normally used when there is heavy mechanical stress, a large amount of sharp shavings, and at high temperatures.
TEMAT 165PolyurethaneNomex*Polyurethane0,36+300-30+130
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength. Excellent mechanical strength. Good resistance to minor welding splatter or hot material. Widely used in laser cutting machines.
Self-extinguishing.
TEMAT 169PolyurethanePanox*/KevlarPolyurethane0,33+300-30+130
Excellent resistance to petroleum products, oils and heavy abrasion . Excellent bending strength. Excellent mechanical strength. Good resistance to minor welding splatter or hot material. It may be considered as the best fabric on the market for use in laser cutting machines. Self-extinguishing.
TEMAT 017PVCPolyesterPVC0,36+100-30+ 70
Mainly used around heavy ambient dust, minor splatters of coolant and oil. Also suitable for use around acids.
TEMAT 020PVCPolyesterPVC0,25+100-30+ 70

 Stiffener materials

Stiffener material code
Description
Thickness(mm)
Notes

PVC 05

PVC
0,50**
Outside width (B) up to 300 mm
PVC 10
PVC
1,00
Outside width (B) from 301 up to 700 mm
PVC 15
PVC
1,50
Outside width (B) from 701 up to 1500 mm

* Kevlar and Nomex are registered Dupont trademarks
** NOT recommended for Thermic-Welded Covers with laminations.
Contact our engineering department for other materials and applications.

Flange materials

Flange material code
Description
Thickness(mm)
AL
Aluminum2,0 – 3,0
AC
Steel2,0 – 3,0 – 4,0
PVC
PVC2,0 – 3,0

Lamination materials

Lamination materials
Description
Primary applications
AL
Aluminum (Baked Enamel Finish)For use around welding splatter, small and medium-sized hot shavings. Especially suitable for use around continuous sparks. Appropriate where lightweight materials are necessary.
INOXIn work environments with large shavings.
Especially suitable for use around acids.
* Kevlar and Nomex are registered Dupont trademarks ** NOT recommended for Thermic-Welded Covers with laminations. Contact our engineering department for other materials and applications.

Flange Fastening Systems

• Solution with sheet steel, aluminum or PVC flange
• Shape and holes per customer drawings
Flange-Fastening-Systems-01
• Solution with sheet steel, aluminum or PVC flange
• Shape and holes per customer drawings
• Solution with connector flange protruding from the cover profile, made of sheet steel, aluminum or PVC
Flange-Fastening-Systems-02
• Solution with sheet steel flange
• Shape and holes per customer drawings
• Threaded flange holes
Flange-Fastening-Systems-03
Solution with rapid VELCRO connection.
A PVC support acts as a flange, with VELCRO strips applied to the stiffener and directly to the machine.
This solution offers:
• Rapid application and removal of the cover
• Low cost
Recommended for dry work environments
Flange-Fastening-Systems-04
Solution with STRONG HOLD rapid connection. Entire fold in PVC
A PVC support and flange act as a flange, to which the STRONG HOLD rapid connection is applied. The flange is made of sheet steel, aluminum or PVC, shape and
holes per customer drawings. This solution offers:
• Rapid application and removal of the cover
• Foam gasket strip provides a tight seal around the connection
Recommended for wet work environments
Flange-Fastening-Systems-05

The above are standard fastening methods for Thermic-Welded Covers.
Other types available upon request.