Soffietti Piani StandardSoffietti Piani Standard
Descrittiva Soffietti Piani StandardDescrittiva Soffietti Piani Standard

Standard flat bellows: more safety for machine tool rails.

The wide range of standard bellows protection produced by PEI guarantees optimal protection for any type of machine tool thanks to the versatility of the forms and the high-quality characteristics of the materials used. The fabrics selected and guaranteed against wear ensure waterproofing and resistance to high temperatures, making the standard PEI bellows ideal for protecting the parts of machine tools.

PEI thermo-welded flat bellows are composed of

  • Bellows (1): fabrics resistant to water, oil, coolants, dust and shavings.
  • PVC supports (2): give rigidity to the entire bellows and are cut to size according to the profile of the customer’s guides.
  • Connection flanges (3 and 4) for simple attachment to the machine.

Read more
Data

Data

Standard flat protective bellows

Definition of data for the calculation of the closed pack of PEI heat-sealed flat bellows

P.A. = Open parcel

P.C. = Closed parcel

Course = Open parcel – closed parcel

Ap = Fold open

B = Bellows width

a = Bellows height

x = Fold height

Formulae
Standard flat protective bellows

Indicative formula for calculating the closed parcel of heat-sealed flat bellows

Contact our technical department

Standard flat protective bellows

Example of calculation

  • * Let us hypothesise the material of the bellows with the code“TEMAT015”
  • ** Let us assume that the thickness of the support is 1 mm
  • *** Let us assume that the thickness of the flange is 2 mm

* See list of materials

Standard Materials

Standard Materials

The fabrics selected by PEI have excellent mechanical resistance and resist bending or folding that might occur during operation in the machine. They have excellent resistance to petroleum products, oils and strong abrasion, small welding splashes or incandescent material.

Main strength characteristics of the bellows materials:

Fabric material codeDescriptionThickness
(mm)
Heat resistancePrimary resistance characteristics
Visible sideFabric insertInternal sideMomentary contact °CContinuous
min. °Cmax. °C
TEMAT 106PtfePolyester0,30+200-30+120
Excellent resistance to oils and chemical products. No adhesive surface. Low friction coefficient. Excellent chemical inertia. Excellent resistance to abrasion and bending strength. Mainly used in grinding machines.
TEMAT 015PolyurethanePolyesterPolyurethane0,25+200-30+ 90
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength.
TEMAT 151PolyurethanePolyesterPolyurethane0,35+200-30+ 90
TEMAT 164PolyurethaneKevlar*Polyurethane0,35+350-30+180
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength. Excellent mechanical strength. Kevlar also has excellent shear strength. Normally used when there is heavy mechanical stress, a large amount of sharp shavings, and at high temperatures.
TEMAT 165PolyurethaneNomex*Polyurethane0,36+300-30+130
Excellent resistance to petroleum products, oils and heavy abrasion. Excellent bending strength. Excellent mechanical strength. Good resistance to minor welding splatter or hot material. Widely used in laser cutting machines.
Self-extinguishing.
TEMAT 169PolyurethanePanox*/KevlarPolyurethane0,33+300-30+130
Excellent resistance to petroleum products, oils and heavy abrasion . Excellent bending strength. Excellent mechanical strength. Good resistance to minor welding splatter or hot material. It may be considered as the best fabric on the market for use in laser cutting machines. Self-extinguishing.
TEMAT 017PVCPolyesterPVC0,36+100-30+ 70
Mainly used around heavy ambient dust, minor splatters of coolant and oil. Also suitable for use around acids.
TEMAT 020PVCPolyesterPVC0,25+100-30+ 70

SPECIAL MATERIALS ARE are also available for specific jobs. Ask our technical office

Materials for the attachment flanges
Materiale supportiDescriptionWidth (mm)Note
PVC 05PVC0,50Bellow lenght (B) fino a 300 mm
PVC 10PVC1,00Bellow lenght (B) da 301 a 700 mm
PVC 15PVC1,50Bellow lenght (B) da 701 a 1500 mm

The PVC support, shaped to measure with the shape of the customer’s rails and welded to each fold of the bellows, gives the heat-sealed bellows excellent stability.

Flange MaterialDescriptionWidth (mm)
ALAluminium2-3-4-5
INOXAISI3041-1,5-2-2,5-3
ACCarbon Steel1-1,5-2-2,5-3-4-5
PVCPVC1-1,5-2-3

The anchoring of the bellows to the machines takes place through the end part of the bellows equipped with rigid flanges in aluminium, stainless steel, carbon steel and PVC.

Flanges

Fixing

Standard flat protective bellows
  1. = Flange

Attachment flange fixing systems

–Type A et Type I

  • Solution with connection flange Type A: Flange covered by the fabric of the bellows (without last support)
  • Solution with Type I attachment flange: Painted flange fixed to the last support of the bellows
  • Solution with attachment flange in steel, aluminium or PVC sheet
  • Shape and drilling according to the customer’s design
Standard flat protective bellows

Attachment flange fixing systems

–Type B1 and Type B2

  • Solution with connection flange Type B1: Flange that protrudes entirely from the shape of the bellows
  • Solution with connection flange Type B2: Flange that protrudes externally with respect to the shape of the bellows
  • Solution with attachment flange in steel, aluminium or PVC sheet
  • Shape and drilling according to the customer’s drawing
Standard flat protective bellows

Attachment flange fixing systems

–Type C

  • Solution with Type C attachment flange: Painted flange fixed to the last support of the bellows with threaded holes
  • Solution with steel sheet attachment flange
  • Shape and drilling according to the customer’s design
  • The flange holes are threaded
Standard flat protective bellows
  1. = PVC cover stiffener
  2. = Strip of Velcro applied to the machine
  3. = PVC stiffener
  4. = Flange
  5. = Strip of Velcro applied to the machine

Attachment flange fixing systems

–Type E and H

Solution using VELCRO type quick fixing

The task of the attachment flange is carried out by a PVC support to which VELCRO is applied. A Velcro strip is applied directly to the machine.

This solution offers the following advantages:

  • Quick application and removal of the bellows
  • Reduced cost

Recommended in dry work environments

Standard flat protective bellows
  1. = PVC stiffener
  2. = Flange
  3. = PVC stiffener
  4. = Flange
  5. = Counterflange

Attachment flange fixing systems

–Type F and G (Entire fold in PVC)

Solution through HIGH TENACITY quick fixing.

The attachment flange is made of sheet steel, aluminium or PVC, with shape and drilling according to the customer’s design.

This solution offers the following advantages:

  • Quick application and removal of the bellows
  • Perfect perimeter sealing by applying mousse.

Recommended in a humid working environment

Structures

Structures

Standard flat protective bellows

Standard structures for flat heat-sealed bellows

UL-2ST = Thermo-welded bellows with two welds and internal traction strap
UL-3S = One side heat-sealed bellows with three welds
DL-DXC = Heat sealed bellows with two welded sides
TL-SIM = Thermo-welded bellows with three welded sides and symmetrical configuration
TL-DXC = Thermo-welded bellows with three welded sides and asymmetrical configuration
TL-DXI = Inclined thermo-welded bellows with three welded sides
CL-SIM = Heat sealed bellows with five welded sides and symmetrical configuration
QL-QUAD = Square heat-sealed bellows
QL-CAP = Thermo-welded bellows with two inclined sides
QL-RETT = Rectangular heat-sealed bellows
QL-ASI = Heat-sealed bellows with four welded sides and asymmetrical configuration
CL-ASI = Heat-sealed bellows with five welded sides and asymmetrical configuration

Documentation